OpenWrt Barrier Breaker metarouter instance on MikroTik RB-2011

posted by on 2015.01.10, under collected, configuration, general, networking


While looking around for a new router for my home network I stumbled over the RB2011UiAS-2HnD-IN produced by MikroTik. It uses a AR9344-DC3A-R SOC (@600Mhz) and offers a broad range of interfaces:

  • 5x 1Gbit copper ports (+ 1x SFP copper/fiber)
  • 5x 100 MBit copper ports
  • 128 MB of RAM and FLASH
  • 802.11 b/g/n wireless interface
  • a micro USB 2.0 port (that can be used to attach storage using an OTG cable)
  • a small color touch display
  • a CISCO-style RJ45 console port

All that is covered by a solid metal chassis and sold for ~120 € – not that bad.The LINUX-based routerOS offers an intuitive CLI – but there is no way to install private packages. So I had a look at to check if OpenWrt is running on this thingy… – it does. But after digging a little bit deeper I found something really awesome: it is possible to run up to 7 virtual instances of OpenWrt on top of the router OS using a mechanism called Metarouter. And each of the instances can be connected to the environment (the external network / other instances, …) using

  • the physical network ports of the router and
  • virtual interfaces connected to other virtual/physical interfaces using (LINUX-) bridges.

That creates the ability to reduce the footprint of my hardware infrastructure significantly by using (buzzword mode on) consolidation via virtualization (buzzword mode off). In fact, by using Metarouter(s) I’m able to replace two „fat“ routers (one running a public access point [currently a WRT 54G], another on used inside our home network [a TPLINK WR1043ND]) and a smaller one (TPLINK 703N) running my private JABBER server by one box. And the concept of having bridges connecting virtual and physical interfaces makes the whole setup a way easier to handle (splitting the network into a private and public network using just one WRT54G + OpenWrt was no fun). And at the end of the day I can keep all my configurations used in the old OpenWrt based setup…

The sad thing: MikroTik only provided support (by publishing patches) for OpenWrt up to Backfire (10.3, first release in 4/2010, 2.6.31) – and I was not able to find any sign that they will continue. Happily liquidcz from the MikroTik forum was able to create a patch usable for Attitude Adjustment (12.09, 4/2013, kernel 3.3). This worked fine – but the successor of AA – Barrier Breaker (10/2014, kernel 3.10.49) brought lots of updates (mainly related to the packages – but also to the kernel). I picket up liquidcz patch and adapted it to be usable with Barrier Breaker. And it was easier then expected :). So this is the outline on how to build OpenWrt Barrier Breaker to be used as a virtual instance on a MikroTik router:

build the firmware image for Mikrotik metarouter


The created image is placed in bin/mr-mips/.

build additional packages


You can find the packages in bin/mr-mips/packages/.

build all packages


trouble shooting

  • if a build using make -j $(nproc) fails, rerun with make -j1
  • if it still fails, rerun with make -j1 V=s
  • if the builder is not able to fetch a packet, check if you could find another source and adapt the Makefile located in the packages// director

Since the flash storage of the router is accessible via FTP, the created image can be pushed down to the device using curl…


Creating a virtual instance on the router is done using CLI metarouter command:

As you could see, BB is very demanding in the context of memory (even a stripped BB firmware – more or less all services from the default image removed, no IPv6 support – needs at least 9 MB). Since the stock router offers ~110 MB of free RAM you can easily run up to 4 instances where each uses 24 MB.

The setup of network interfaces is well documented in the metarouter manual and straight forward.

If you need to store a lot of data you can use the micro USB port to attach any USB storage using an OTG-cable:


IMPORTANT: The USB drive must be formated with the (proprietary) MetaFS filesystem – so all data on the USB drive is lost.

Since the storage of the router is exported via FTP, curlftpfs can be used to mount a folder located on the attached USB drive into the local file system of an OpenWrt instance. Do not try to abuse the system as NAS device – the storage access eats the CPU (if you do a file transfer to the USB storage the CPU usage goes up to 100%).

ressources / links

original patch created by liquidcz: here

patch for Barrier Breaker: openwrt_metarouter_1407.patch

default fw image (Barrier Breaker, r43889): openwrt-mr-mips-default-image-rootfs.tar.gz

lowered memory footprint: openwrt-mr-mips-small-image-rootfs.tar.gz

image builder: OpenWrt-ImageBuilder-mr-mips-for-linux-x86_64.tar.bz2

binary packages: here


Have phun!